 |
| easy keep bicycle shifter with lubricate google doc. |
At the moment we do often shifting, becomes heavy. In fact, when imposed when shifter ugly wires. The cable will break. Still mending when the cable cuts in the road that is still in the city. If in the mountains or in the villages far from a bicycle repair shop?
Weighing shifter at the time of the shifting, occur as a result we neglect to clean or lubricate the cord. Because of the rain and too tired. We neglect to clean itself. Many of us who choose to wash steam. Let the bike we be sprayed with water high voltage. But if we realize the consequences, we can be sure will not wash with the use of the steam services. Due to high pressure water and sprayed onto our bicycles, seapik anything. Water can be entered into a certain cable protection, hub / freehub or even enter into our tires. As a result, the performance of the components is disrupted.
Yet to clean the bike, no more than 30 minutes. Not too much trouble. In fact, we can take care of and clean up your heart's content. Lubricate the parts that may not be carried out in a steam earlier.
To clean the shifter cable, is actually very easy. Simply by rotating the rear tire of the bike. Obviously the bike has been established using the standard triangle. While the tire rotates, tekanlan RD shifter lever that moves the greatest gear. After that, stop the wheels with the rear brake. Then press the shifter lever to move to the small gear. Cables certainly be loose, and we can unplug the cord protector of the frame. Loosen or decrease or increase the patron. Clean the cable using a clean cloth. Then give the lubricant, whether it's oil or chain or singer can also fork oil. The important thing pelumaslah ...
If the cables are cleaned and lubricated, return the cable protector to its original position. Raise the shifter back into its original position by turning the crank so that the rear tires spin. Done.
To clean the shifter cable in the FD is done in the same way. good luck
No comments:
Post a Comment